How to Troubleshoot Paper Jam in Laser Printer
Again and again, the trouble of paper jams have always disturbed our Lajer printer life in many occasions, thus causing many inconvenience in our office and family life as well. Theretofore, here we will get you informed of how to troubleshoot paper jams in Laser printer to make a difference to your printer life.
Problems: Paper cannot be fed into the printer or paper jam has been invoked once it has been fed in.
Troubleshooting solution: 1. Check whether the electromagnetic clutch coil of roller can works or not. If not, you should further observe the voltage of electromagnetic clutch coil. And if the voltage is not normal, you should replace or repair the current clutch; on the contrary, the circuit of the clutch should be checked accordingly.
2. Observe whether the rubber roller is covered with dust, waste and something else dirty or has been aging or malfunctioned. If the answer is yes, the rubber roller is imperative to be replaced.
3. Inspect the working conditions of the trust board. And it should be replaced with the sound one if it cannot work any longer.
Problems: Paper jam has happened in the printer channel
Troubleshooting problem: First of all, you should observe that whether paper has been deformed in the channel; And if so, the distorted papers should be replaced. Subsequently, paper sensor of the channel should be attached into great importance. Meanwhile you should clean the sensing window of optical sensor if the checking results are negative. Worse still, the only to figure you out is to replace it. Furthermore, you should also pay attention to printer feed rollers. And if it has been slipping, you can resort to troubleshooting solutions for rubber rollers once again.
Problems: Paper jams have taken place in fuser assembly.
Troubleshooting solutions: In the first place, you should repair the resetting spring of the printer if the optical sensor in printer channel hasn't been reset normally. Subsequently, wastes and dust are needed to be cleaned up if there accumulated melting toner in the printer guide. Furthermore, check whether the optical sensor in printer channel has been reset normally. And the resetting spring should be repaired otherwise. What's more, to clean or repair separation claw if it has been damaged or dusted. Ultimately, clean the optical sensor or a reset spring to render the paper photoelectric sensor normal.
By the way, there are many other causes can lead to paper jam in Laser printer, for example, Laser printer malfunction. As we all know, Driver should be maintained in its optimal states and latest version in that the device it attached to will work in normal mode upon its malfunction and invalidation. And here we propose you HP Drivers software of Driver Robot to make it for you automatically and professionally.
Are you looking for: How to Troubleshoot Printer Not Printing, HP LaserJet 1005 Driver, HP LaserJet 2300 Driver